IWI TAVOR X95 Review

IWI TAVOR X95 Review

I’m going to be right upfront about it and admit that I love Israeli weapons and equipment. I’ve worked private security contracts in Israel and the West Bank and seen Israeli troops and gear up close. I’ve owned multiple Desert Eagles. One of my favorite handguns, and one I use on a weekly basis, is a venerable IMI Jericho 941. Even my Level IV ballistic plates came from Israel.

Israeli equipment is both innovative and practical, which brings us to the Tavor X95 rifle. No one can argue that it isn’t innovative. The fact that it has been in regular service with the Israeli military for the past 14 years certainly argues that it has proven itself practical. But how does it stack up against the incredible variety of MSRs and carbines available to gun lovers in the USA? That’s what I’m going to discuss in my IWI TAVOR X95 Review.

A Little Tavor History

The Israelis used the M16 rifle and M4 carbine for quite a few years. By the time the turn of the century rolled around, they were ready to replace them with something new. They had served well, but they had been through the mill, and the Israelis wanted to replace them with a rifle they felt was more modern and easier to maintain in the harsh environment. Anyone who has spent any time in the Middle East can tell you how hard the heat and dust are on equipment.

The other primary reason they were ready for a change was that they wanted a weapon that was more compact and easier to maneuver without losing the benefit of a long barrel. Along with riding in IFVs, a great deal of the action in Israel takes place in the very confined quarters of the towns and villages there.

Bulk Ammo for Sale at Lucky Gunner

Development of what would eventually become the Tavor began in 1995. The design was ready for trials in 2001 and 2002. Several tweaks and design refinements were made, and in 2009, the Tavor was officially adopted as the service rifle for the IDF. Since being adopted, the Tavor has served with distinction. Israeli soldiers say it operates flawlessly.

The Tavor X95

The Tavor X95 isn’t a new firearm, but it is the latest iteration of a civilian version of the Tavor. The SAR, the earlier version, had multiple features that made it less than desirable, although it is still available from IWI. The X95 has been around for a while now, and it offers an excellent alternative to an AR short-barrel rifle that doesn’t require NFA registration and the $200 ‘tax’ stamp.

A bullpup is a carbine with the action located behind the pistol grip instead of in front of it. This offers benefits such as a center of gravity that is closer to the shooter and a shorter overall length, all without sacrificing barrel length. IWI took it a step further and produced a gun with a very simple and reliable action that is similar to the AK47. Overall, the Tavor is an excellent CQB weapon.

Tavor X95 Specs

  • Caliber: 5.56NATO
  • Action: Gas-operated long-stroke piston; Closed rotating bolt; semi-auto
  • Barrel: 16.5”/1:7 (13” and 18.5” available)
  • Barrel Material: Chrome-lined, cold hammer forged CrMoV
  • Trigger: 6.2 lbs
  • Finish: Black, Flat Dark Earth, OD Green
  • Magazine: AR15
  • Length: 27.4” w/muzzle device
  • LOP: 14.7”
  • Stock: Polymer
  • Sights: Folding front blade sight/Tritium insert; folding rear sight
  • Weight: 7.9 lbs

A Closer Look at the Tavor X95

In short, bullpups are designed to give infantry troops the capabilities of a rifle in a package the size of an SMG. And the Tavor does that. But the design doesn’t come without drawbacks. Do they outweigh the benefits? Let’s take a closer look…

On the Outside


It’s not entirely accurate to describe the X95 in terms of the receiver and stock since everything is pretty much one piece. It’s better to talk about the body of the rifle. The entire body is made from polymer. Of course, the barrel, action, and mechanical components are steel. The polymer components are available in OD green, Flat Dark Earth, and black.

Although similar in appearance to the SAR, IWI made some improvements. The Tavor-style whole-hand pistol grip is modular now and can be swapped out for a traditional trigger guard. The charging handle has been moved further back. This makes it easier to operate and provides some extra room on the handguard. The buttstock has also been enlarged.


Another improvement from SAR is the rails. The SAR has one rail on the top. The X95 has a longer forearm with a rail at the top. But it also features rails on both sides and the bottom. The side and bottom rails have removable covers. That means you have lots of room to mount an optic, a light, and a vertical grip.

IWI TAVOR X95 Reviews


The standard X95 barrel is 16.5”. Both 18.5” and 13” barrels are also available. The chrome-lined barrel is cold hammer forged chrome-moly-vanadium steel. It withstands high temperatures very well and resists corrosion. It has six grooves with a 1:7 right-handed twist.


The flip-up sights are integral to the top rail. They stand up pretty high for use and fold away completely if you mount an optic. The rear sight is a peep sight, and the front is a blade sight with a Tritium insert. There is no way they can be co-witnessed with an optic.


The Tavor X95’s controls are a bit of a mixed bag. As with other aspects of the X95, IWI has made some improvements over the SAR.

One of the good things is the AR-style thumb safety. It is in a position similar to that of the AR and is easy to manipulate with your thumb. It can be switched from the left side to the right side for left-handed shooters. Another improvement from the SAR is the relocation of the charging handle closer to the center of mass. It makes it easier to manipulate and helps balance the rifle.

Fortunately for left-handed shooters, the bolt handle and ejection port cover can be switched to make the rifle southpaw-friendly. That saves lefties from having hot brass flying just in front of their face while shooting.


One of the controls that hasn’t been so well received is the bolt release. To be fair, it’s a feature that people either love or hate. It’s a square button located on the underside of the rifle behind the magazine. It is smaller with a lower profile than the previous design. For some, that’s a plus, but for others, that’s a problem.

Detractors feel it’s too difficult to manipulate to lock the bolt open. Another complaint is that the release has a hair trigger, making it easy to drop the bolt inadvertently. Further, because it closes so easily, just sitting it down roughly on a bench with the bolt open can cause it to release, closing the bolt. It’s just one of those things you have to get used to.

Another control that falls in the ‘have to get used to’ category is the magazine release. It’s a push-button control like an AR. But instead of being behind the trigger like an AR, it is just in front of and above the trigger. Since it’s ambidextrous, it’s easy to reach with your trigger finger.

Internal Features


The X95 uses a long-stroke piston-driven system that is well-known for its durability and reliability. The Israelis have made use of the AK-style piston system before in the Galil. It delivers reliable service in the dusty environment of the region. The X95 uses standard AR magazines.


Bullpups are known for having spongy triggers. This is because they require a long trigger bar that connects the trigger in the front to the hammer way in the back. The original Tavor SAR had a particularly egregious example of such a trigger.

IWI has worked hard, and the X95 trigger is a big improvement. It still isn’t as crisp as many other triggers, but the new fire control pack delivers a much smoother 5 to 6-pound pull.


If you have grown up shooting ARs or other MSRs, a bullpup takes some getting used to. The center of gravity is different, being much further back. This can be a good thing, but it is different from other types of rifles. The short design also requires the shooter to pull everything in quite low and close to your body to get a good cheek weld and sight picture. Again, this is something someone trained on a bullpup does naturally and something anyone else can get used to.

When IWI moved the charging handle back, it made it easier to manipulate. The large buttstock is also a plus, as it gives you more room to work with at the shoulder. The butt plate angle and pistol grip are quite vertical. The pistol grip is easy to change if you want something else.

The manual of arms for any bullpup is a bit awkward, and the X95 is no exception. This is especially true when loading a new magazine. The shooter has to reach back almost under their armpit to insert a new mag. It’s especially difficult if you are prone.

The X95 is on the heavy side. Its compact size and weight of almost 8 pounds empty make it a bit of a rock to handle.

the IWI TAVOR X95 Review

Clearing Malfunctions

Clearing a malfunction is especially difficult. Working the action by hand, operating the bolt lock, and checking the chamber or replacing the magazine almost requires a third hand. It’s certainly more complex than with an AR or AK-style rifle. The good news is that the X95 is a remarkably reliable rifle and doesn’t suffer from a lot of malfunctions. But when it does, it takes a bit of work to get things moving again.

Using a Suppressor

Using a suppressor with the X95 delivers mixed results. On one hand, the center of gravity, being toward the rear of the gun, offsets the weight of a suppressor, making it easier to shoot. On the downside, when fitted with a suppressor, the X95 tends to blow carbon and gas back into your face. This comes both from the ejection port and the unused ejection port on the left side of the receiver.


The Tavor X95, right out of the box, will shoot 2.5 to 3 MOA groups. That’s 3” at 100 yards. In a world where the average AR will deliver 1 MOA groups, that’s a bit of a disappointment. But if you think of the X95 as a lightweight and compact AK with improved ergonomics intended for close quarters, it doesn’t seem so bad. In reality, the X95 is more than capable of engaging man-sized targets out to 400 yards.


Reliability is an area where the X95 shines. It will digest any ammunition you can feed it. And it will do it all day long. That means that you can load up standard AR magazines with any 5.56 NATO ammo you can find, and the X95 will perform like the combat rifle it is.


The X95 is dirt simple to disassemble and maintain. The whole thing comes apart with only three pins. Remove the first, and you get the bolt out. The other two allow you to take the trigger assembly out. That’s it.

IWI TAVOR X95 Pros & Cons


  • Overall short length
  • Full-length barrel
  • No need for an NFA stamp
  • Reliable action
  • Very light recoil
  • Good trigger
  • Uses AR magazines
  • Easy to disassemble


  • Manual of arms takes some getting used to
  • Mediocre accuracy
  • Difficult to clear malfunctions
  • Loading a new magazine is awkward
  • Expensive

Looking for More Quality Bullpup Options?

Then check out our thoughts on the IWI Tavor TS12 Bullpup Shotgun, the Benjamin Bulldog, as well as the Best Bullpup Rifles & Shotguns you can buy in 2023.

Or, for more traditional AR and AK alternatives, take a look at the Best AR-15s under 1000 Dollars, the Best AR-15 in .22LR, the Best Complete AR-15 You can Buy at Primary Arms, the Cheapest AR-15 Complete Rifles & Builds, and the Best AK-47 currently on the market.


So there you have it. As bullpups go, the Tavor X95 is one of the best. Once you get used to the unique manual of arms, it shines as a CQB rifle with the barrel length to reach out to 400 yards.

Until next time, be safe and happy shooting.

Source link: https://thegunzone.com/iwi-tavor-x95-review/ by Mike McMaken at thegunzone.com