Red dot sights are ideal for close-quarter combat scenarios and really quick acquisitions with your choice of rifle.
But there is a big downside…
With 1x red dot sights, you’re not getting any magnification. That’s why we’re checking out a great alternative in our in-depth Vortex VMX-3T Magnifier with Flip Mount Review.
It’s designed to give you 3x magnification capabilities with a standard 1x red dot sight. Yet, with a push of a button, you can shift the magnifier out of your line of sight, so that you only have your red dot to contend with. This gives you the best of both worlds.
The Push/Pull Design
So straight away, we’d like to highlight this Vortex Magnifier’s push/pull type design. Very simply, you push a button and pull the sight to the left in a fluid action with just your fingertips required for the process. This is great, but one issue is that some shooters might want the magnifier to pull to the right, instead of the left. However, this is easily rectified by switching the mount, so it flips to the right.
Furthermore, by pulling the magnifier out of the way, you can then utilize any backup sights you may have installed on your AR platform.
You do get about 2.2 inches of eye relief to play with when the VMX-3T is mounted. This suits shooters that prefer getting their eye up a little closer to the charging handle when targeting.
If you do want to have some extra space between your eye and the charging handle, you could bring the magnifier right to the start of your rail, but this would mean foregoing your iron sights.
Both mounting and dismounting the Vortex VMX-3T Magnifier with Flip Mount is a very simple and convenient process. No tools are needed to remove the sight, but using a wrench is advisable to mount it back on your rail again.
It’s just a single bar that fits into your Picatinny/Weaver rail system, which is made to make a really tight fit. Also, if you’re wondering about how to make the sight flip to the right, there are just two screws that you need to undo, and then you can reattach the sight accordingly.
However, the best part is that…
Removing and adding your magnifier will not mean you will have to re-zero the magnifier. It’s only the red dot that will need re-zeroing if you were to remove it and add it back onto your rifle. Essentially, the magnifier just co-witnesses and sets up straight away with your zeroed-in red dot.
The Lenses and Build Quality
The lenses on the VMX-3T Magnifier are fully multi-coated so that you retain a sharp, clear, and bright sight image. As well, the magnifier is nitrogen purged. This is a process that rids all the oxygen internally so that it should never fog up.
In addition, the sight is waterproof due to the O-ring seals on the glass. And, this 30 mm ring design has been hard coat anodized to give it anti-corrosive properties and long-lasting performance.
Compact and lightweight…
At just 4.3 in length and weighing in at a mere 11.9 ounces, you have a very compact and lightweight accessory to mount on your AR set-up. This is important, as the weight can soon add up when you have iron sights, a red dot, and other accessories filling up your rail system.
The main housing is solid machined aluminum. This is what makes it so lightweight. And yes, the total weight includes the mount.
To ensure you get the clearest image, control over the focus is very important. That’s why Vortex has added a focus ring at the back of the sight, so you can adjust to personal preferences very smoothly.
Yet, what’s really impressive is…
There are two adjustment knobs that allow you to make changes to your field of view, where the magnification centers in your sight image. This allows you to center your focus exactly on the red dot being used on your rifle. This does not change your point of aim but instead just allows you to tighten the magnification on your red dot.
So why choose a magnifier anyway?
Basically, for anyone wanting to shoot accurately beyond 100 yards with their red dot sight, they are going to end up with some difficulties. Your groups will more than likely start to spread out past this distance without some form of magnification.
Of course, it’s possible to reach out to 200 or 300 yards with just a red dot alone. Yet, the dot becomes very large in comparison to your target. This is also true with the smaller red dots out there. So, we think it’s really worth investing in a magnifier if you’re taking less than mid-range shots, but require accuracy for those ranges in a split second.
Plus, you can experience pixelation with red dots, where they become quite fuzzy looking. A magnifier is a great way to fix this issue.
Which red dots will it work with?
The Vortex VMX-3T Magnifier will work very well with all the Vortex red dot sight offerings, such as the Spark and Spitfire models. But also, other brands that produce red dots, such as Trijicon and EOTech, work really well with this Vortex design.
So, along with everything we’ve covered so far, we have to say that the Vortex VMX-3T Magnifier with Flip Mount also offers amazing value for the money.
This is especially the case when you compare it to other magnifiers from EOTech or Aimpoint, for example, which can be quite pricey. Of course, high-end optics from EOTech and Aimpoint will be in another league, but if you are on a budget, the Vortex VMX-3T Magnifier is a surefire winning option, in our opinion.
Is there a warranty?
Yes, and it’s great! The Vortex VIP Warranty means that Vortex will repair or replace your VMX-3T in the event it becomes damaged or defective with no charge. Also, if they cannot repair the magnifier, they’ll replace it with another one in perfect working order, of equal or better physical condition.
Other key warranty information includes the fact that…
- You get a full lifetime warranty.
- It’s completely transferable.
- No warranty card to fill out.
- You don’t need to hold onto the receipt.
Bear in mind that the warranty will not cover theft, loss, deliberate damage, or cosmetic damage that doesn’t hinder the performance of the magnifier.
Pros and Cons
- Smooth push/pull design.
- Lightweight and compact.
- Easy to mount/dismount.
- No zeroing is needed.
- Fully multi-coated lenses.
- Waterproof performance.
- Nitrogen purged for fog proofing.
- Excellent field of view adjustments.
- Easy to use focus ring.
- Superb value for the money.
- Comes with a flip mount.
- Super comprehensive Vortex VIP Warranty.
- Not in the same league as some higher-end designs, as is to be expected.
- Some shooters might require a bit more eye relief.
Looking for more superb high-quality Red Dot Options?
Then check out our reviews of the Best Cheap Red Dots under 100 Dollars, our Best Primary Arms Red Dot Sight review, the Best Red Dot Magnifier Combo Sight, the Best Red Dot Magnifier, and the Best Red Dot Sight for AK47 you can buy in 2023.
You may also be interested in our in-depth reviews of the Trijicon RMR 6 5 MOA Adjustable LED Red Dot Sight, the Aimpoint Micro T 1 Tactical Red Dot Sight, our Lucid Red Dot Review, our Primary Arms 2 MOA Advanced Micro Red Dot Review, and our Trijicon RMR Red Dot Sight Reviews.
The Vortex VMX-3T Magnifier with Flip Mount is solid, dependable, adjusts well, flips to the side smoothly, and dismounts/mounts easily without the need to zero in. Also, the pricing is excellent for a magnifier of its caliber.
What you’re getting here is a very rugged Vortex design that does give the accuracy you need out past 200-300 yards. So it’s really suited to tactical shooters that love their red dots but want that mid-range accuracy potential on a budget.
We hope you’ve enjoyed a little look at this impressive magnifier. All-in-all, we thoroughly recommend it, and if you do decide to get one, you should have it mounted and functioning in no time at all.
Happy and safe shooting!
Source link: https://thegunzone.com/vortex-vmx-3t-magnifier-review/ by William Taylor at thegunzone.com